ADDER CCS4-USB Guide de l'utilisateur télécharger pdf (Page 15)

INSTALLATIONCONFIGURATIONOPERATION

FURTHER

INFORMATION

INDEX

Conguration

INITIAL CONFIGURATION

The conguration, monitoring and management of the CCS-PRO4 unit is performed

using the in-built Adder CCS Manager utility which is accessible via the network

connection using a standard web browser.

Accessing the CCS Manager

To access the CCS Manager

1 Use a computer that is directly or indirectly (i.e. via a network switch) connected to

the CCS-PRO4 unit. If you need to make a temporary connection, see right

2 Run a web browser on your computer and enter the IP address of the CCS-PRO4.

The default setting is: 192.168.1.22

3 If requested, enter your username and password to log on.

 Note: The default username and password are ‘admin’ and ‘password’ respectively.

 The opening page of the CCS Manager should be displayed:

Temporary link from

your computer

To temporarily connect a computer to the network port

1 If you need to make a temporary connection for conguration purposes, use a

standard patch cable (cross-over or straight connections are both supported)

to link the Ethernet 10/100 network port ( ) of the CCS-PRO4 unit to your

computer’s network port.

Logging out

There is no log out option. You merely need to close the browser that you are using to

access the CCS Manager.

 Note: If the CCS-PRO4 has been previously congured and those settings are unknown, see

the Troubleshooting section for details about reverting to the default settings.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

Pas de commentaire

ADDER CCS4-USB Guide de l'utilisateur Page 15