search

ADDER CCS4-USB Guide de l'utilisateur Page 12

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 38
  • Table des matières
  • DEPANNAGE
    •
  • MARQUE LIVRES
    • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 11
11
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Optional LED monitor indicator connections
The optional CCS-XB module enables you to add LED (Light Emitting Diode) monitor
indicators to each of your video display screens to show which are active.
The CCS-XB module connects to the OPTIONS port of the main CCS-PRO4 switch.
Each individual LED monitor indicator then connects to one of the ten ports on the
CCS-XB module.
Notes: The CCS-XB module MUST be connected before the switch is powered on, otherwise the
module will not be recognized. Also, if the module is temporarily disconnected from the switch
during operation, communication between the two will cease and the switch will need to be re-
powered with the CCS-XB module attached.
To connect the CCS-XB module and monitor indicators
1 Remove power from the switch. Use the at cable supplied with the CCS-XB kit to
link the module to the OPTIONS port of the CCS-PRO4 switch.
Note: If the optional RC4 remote control is connected to the Options port, remove this rst. It
can be attached to the CCS-XB module later (see here).
2 Link each LED monitor indicator to a port on the CCS-XB
module - ports 1 to 4 are most commonly used.
Adder CCS-PRO4
switch
Link cable
Adder P/N: VSC46
(Included in CCS-XB kit)
Adder CCS-XB
module
3 You need to tell the CCS-PRO4 which LED monitor indicator to illuminate (and in
which colour) for each channel. To do this connect your computer to the CCS-PRO4
switch via a network connection and use the Free-Flow application. Please see the
section Conguring LED monitor indicators.
4 Apply power to the switch.
www
.a
dd
CCS-XB
LED monitor indicator with
3 meter lead
Port 2
Port 3
Port 4
Insert the lead for
the rst indicator
into port 1
Each indicator has an adhesive pad to
assist with mounting on your video
displays.
IMPORTANT: Do not
connect the OPTIONS
port to any network.
Vue de la page 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

Commentaires sur ces manuels

Pas de commentaire
  • IDEAL INDUSTRIES White Acoustics Creative Accents E-TEN EMU
  • RTS Extensions de puissance I-mate Logiciel Polycom Systèmes de vidéoconférence HP Accessoires pour écrans plats Netgear Extensions du réseau
  • Acer P236H Samsung SGH-A800 Acura TSX Electrolux EDC78550W Acer V193L
  • Teka HE 725 Manuel de l'utilisateur AOC E2460SH Fiche technique Samsung AG-103VCAWC Manuel de l'utilisateur Biamp ELD-1 Manuel de l'utilisateur Rothenberger ROSPI H+E PLUS Manuel de l'utilisateur