ADDER SVMS2-QUAD Spécifications télécharger pdf (Page 24)

SmartView Multiscreen Installation and Use Page 23

3. Using the SmartView Multiscreen

This section explains the general operation of the SmartView Multiscreen. We

recommend that you read this section before starting to use the product.

3.1 Power on status

At power on the SmartView Multiscreen selects computer 1 and displays '1'. If a

password has been set then ‘P’ will be displayed and the SmartView Multiscreen will

remain locked until a valid password is entered.

3.2 Front panel key and remote controller

The front panel key is used to select which channel is currently controlled by the

shared keyboard, mouse and monitor ports. Pressing the key during normal

operation will cause the next channel to be selected.

The key can also be used to access the SmartView Multiscreen’s configuration

mode (see section 2.6). To do this press the key and hold it down for 5 seconds until

‘C’ appears on the SmartView Multiscreen’s front panel display.

An optional remote controller is also available which replicates the front panel key

and display, but can be located remotely from the SmartView Multiscreen. This is

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 45 46

Pas de commentaire

ADDER SVMS2-QUAD Spécifications Page 24