ADDER AdderView CATx EPS-S8 Guide de l'utilisateur Page 8

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 70
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 7
 




7
Connections
Installation of the AdderLink IP involves a number of basic
connections to some or all of the following items:
Host computer or KVM switch
ð
Local keyboard, video and mouse
IP network port
Modem/ISDN port
Power input
Power control port
COM1
MODE
M
COM2
POWER
CONTROL
INDOOR
USE
ONL
Y
KVM
CONSOLE
5V
1
2
ON
2A
COMPUTER
/
KVM
SWITCH
Host computer or KVM switch
The AdderLink IP can either connect directly to a single host computer or to
range of hosts via one or more KVM switches.
To connect a host computer or KVM switch
1 Ensure that power is disconnected from the AdderLink IP and the computer
or KVM switch to be connected.
(Note: If it is not possible to switch off devices prior to connection, then
a ‘Hot plug’ procedure is available – see the Hot plugging and mouse
restoration section for more details).
2 Connect the plugs at one end of a KVM cable set to the keyboard, video
and mouse sockets of the computer or KVM switch (for mouse plug
conversion information – see Appendix 7).
Monitor (video) Blue
Keyboard Purple
Mouse or Mid green
3 Connect the plugs at the other end of the KVM cable set to the corresponding
sockets, collectively labelled as ‘COMPUTER/KVM SWITCH’, at the rear of the
AdderLink IP.
Vue de la page 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 69 70

Commentaires sur ces manuels

Pas de commentaire